High Efficiency Ultra-fine Grinding Mill
MSF ultrafine grinding mill is used to produce non-metallic minerals to ultrafine powder from 325 mesh to 2500 mesh.
Application
MSF series high efficiency ultra-fine grinding mill is suitable for grinding more than 200 kinds of materials. The Mohs hardness of the materials should be less than 9. The materials are limestone, calcium carbonate, dolomite, barite, gypsum, bentonite, coal, mica, talc, graphite, fluorite, calcite, limestone, kaolin, illite, pyrophyllite, sepiolite, potash, feldspar etc. The input size of raw material could be around 350mm, and the final size could be from 325 mesh to 3000 mesh, 5 microns to 47 microns.
Main Structure
A complete MSF series high efficiency ultra-fine grinding mill consists of hammer crusher, elevator, hopper, belt conveyor, main mill, classifier, pulse dust collector, blower, pipes, motors, control box, etc.
Technical Advantages
High output, low energy consumption
In the case of the same finished product fineness and motor power, the output of the ultra-fine grinding mill is more than double that of other mills such as ball mills, jet mills, and stirring mills.
High fineness of finished product
In case that you want to grind micro powder of non-metallic material from 325 mesh to 3000 mesh, MSF micro powder grinding mill is your best choice. You can adjust the size of the output size.
Wide range of applications
The final product from micro powder grinding mill can be used in painting, coating, paper making, PVC making, toothpaste making, drilling mud, additive in chemical and plastic, high quality paper as additive, etc.
Environmental friendly design
The use of pulse dust collector, soundproof room and muffler can reduce dust pollution, reduce noise, and reach a very high environmental protection standard, no pollution to the surrounding environment.
Technical Parameters
Content | Model | ||||
MSF600 | MSF800 | MSF1000 | MSF1250 | MSF1680 | |
Roller qty. (pieces) | 12 | 21 | 28 | 32 | 44 |
Diameter of ring(mm) | φ600 | φ800 | φ 1000 | φ1250 | φ1680 |
Main shaft speed (rpm) | 250-280 | 230-240 | 180-200 | 135-155 | 120-130 |
Max.feeding size (mm) | 20 | 20 | 20 | 20 | 25 |
Final size(mesh) | 325-2500 | 325-2500 | 325-2500 | 325-2000 | 325-2000 |
Capacity (tph) | 0.2-3 | 0.5-4.5 | 1-8.5 | 2.5-14 | 5-25 |
Dimension(m) | 11.5*3.5*5.2 | 13*3*5.8 | 18*4.6*8.6 | 14*9*10.25 | 16*5*11 |
Main mill (kw) | 45 | 75 | 132 | 200 | 315 |
Classifier(kw) | 15 | 18.5 | 30 | 75 | 132 |
Blower(kw) | 37 | 45 | 75 | 132 | 200-220 |
Hammer crusher Motor(kw) | PC300×400 PC400×600 | PC400×600 | PC600×800 | PC600×800 | PC600×800 |
11/18.5 | 18.5 | 45 | 45 | 45 | |
Bucket elevator Motor(kw) | TH200×8.2m TH200×6.04m | TH200×9.79m | TH300×11.05m | TH300×13.55m | TH300*16.31m |
3 | 3 | 4 | 5.5 | 7.5 | |
Belt feeder Motor(kw) | 300×60 ×1000mm | 300×60 ×1800mm | 300×60 ×1800mm | 400×80 ×2000mm | 400×80 ×2800mm |
1.1 | 1.5 | 1.5 | 1.5 | 2.2 | |
Pulse dust collector | DMC96 | DMC120 | LDMC35-8 | LDMC64-9 | LDMC64-9 (2sets) |
DMC160 | |||||
Discharge screw conveyor Motor(kw) | / | LS219-4.5 | LS245-6.2 | LS315-10.34 | LS315-10.34 (2sets) |
LS219-3 | |||||
/ | 3/3 | 4 | 7.5 | 7.5*2 | |
Air compressor Motor (kw) | KSH150D | KSH240D | LGY5-8 | LG6.2/8 | LG10/8 |
11 | 15 | 30 | 37 | 55 | |
Customer Site
