Ultra-fine Grinding Mill Machine

Introduction of Ultra-fine Grinding Mill Machine

As part of our commitment to bringing you leading-edge technology, we offer you our MSF ultra-fine-grinding mill machine. This micro powder grinding system provides a cost-effective way to grind materials to micro powder. It is more efficient and lower energy consumption than the conventional mills like raymond mill and ball mill. This ultra-fine grinding mill machine generates consistent yields of micro powder between 3 and 45 microns or between 325 and 2500 mesh. In some cases it can even produce ultra-fine powder 3000 mesh.

Raw Material

MSF ultra-fine grinding mill machine is suitable for grinding materials which are non-flammable and non-explosive,such as dolomite, calcium carbonate, kaolin, bentonite, talc, mica, barite, gypsum and graphite and so on.

Application Industry

Material	Fineness (Mesh)	Application
Calcium carbonate	600	Coating, paper making toothpaste, healing drugs and daily chemical using, pvc making, etc.
	800	Paint, coating, paper making toothpaste, healing drugs and daily chemical using, pvc making, etc.
	1250	Paint, coating, paper making, toothpaste, healing drugs and daily chemical using. Additive in chemical and plastic high quality paper and seal oil as additive, etc.
	1500	Paint, coating, paper making, toothpaste, healing drugs and daily chemical using. Additive in chemical and plastic high quality paper and seal oil as additive, etc.
Barite	600	Paint, rubber packing. Drilling mud, pvc making, plastic, etc.
	800	Paint, rubber packing. Drilling mud, plastic, etc.
	1250	Paint, rubber packing, paper making, drilling mud, plastic, etc.
	2500	Paint, rubber packing, paper making, drilling mud, plastic, etc.
Calcite	600	Paper making, coating, printing ink, main ingredients of toothpaste, etc
	800	Paper making, coating, printing ink, pvc additives, cable additives, etc
	1250	Degradable plastic,paper making. Paint,coating, printing ink, adhesive,etc
	2500	Degradable plastic, coating, printing ink, adhesive,etc
Mica	600	Pearl pigment, toothpaste, coating, paint, etc
	800	Pearl pigment, mica paper coating, paint, etc
	1250	Oil drilling mica pulp, pearl pigment, paper making, coating, paint, plastic, cosmetics, etc
	2500	Oil drilling mica pulp, pearl pigment,paper making, coating, paint, plastic, cosmetics, aerial material, etc

Key Parts

The key parts of ultra-fine grinding mill machines are: grinding roller, grinding mill, classifier, turntable, pins, turntable assembly, classifier, reductor, etc.

Maintenance and Precautions

1. Before starting the micro-powder mill, first check whether the installation of each part meets the requirements; then check the lubrication of the bearing in detail, and pay attention to adding enough butter; do not enter the body of metal objects. The inspection method is: pull the belt by hand to test Rotate to see if there are phenomena such as biting brakes and rotating and hitting the shell, so as to avoid accidents. If there is any abnormal sound, it should be repaired immediately.

2. The feeding of the micro-powder mill should be uniform, and the diameter of the pellets should be determined according to the hardness of the raw material. The diameter of general hard material shall not exceed 20 mm, and the diameter of high hardness shall not exceed 10 mm. Unlimited softness.

3. The motor load of the micro powder mill should not be overloaded during use, and the general current should be controlled between 80A-110A to ensure the normal operation of the machine.

4. For micropowder mills, the grinding rings and rollers should be checked frequently. If serious wear is found, they should be replaced in time.

5. The rotating speed of the micropowder mill is high, so the bearing should be maintained frequently, and the temperature of the bearing should not exceed 65 degrees. Maintain once every 7 days, and use molybdenum disulfide or trilithium grease for maintenance.