MSF Ultrafine Mill
Capacity: 0.2-25tph
Intelligent Design/Guaranteed Installation/Offices & Spare Parts in Latin America
The MSF ultrafine mill is designed to produce fine and ultrafine powder. The original size of the raw material fed into the ultrafine mill can be around 20 mm. After milling, the customer can obtain fine and ultrafine powder down to 3000 mesh (5 microns).
Technical Advantages
High degree of automation
It uses a dual control mode: “automatic computer + manual on-site” to start and stop the machine with a single button. It is also equipped with a remote monitoring application.
High efficiency and low consumption
With the same fineness of the finished product and the same motor power, the performance is superior to that of other mills.
Wide range of ground powder
By adjusting the speed of the cage classifier, powder between 150 mesh and 3000 mesh can be produced.
High durability of wear parts
The rollers and ring are forged from special wear-resistant materials, which improves their durability.
Internal Structure
Operating Principle
After initial crushing with a hammer crusher, the raw material is conveyed to the top of the main mill by a bucket elevator. Feeding is controlled by hoppers and belt feeders, ensuring a continuous and uniform supply of materials with a particle size of less than 20 mm.
The material falls onto a high-speed rotating distribution disc and, by centrifugal force, is drawn into the crushing zone formed by the rollers and grinding ring, where it is crushed and ground. The ground powder is blown by a high-pressure airflow into a classifier. The coarse powder is separated by the impeller and returned for regrinding, while the fine powder is carried by the airflow to the downstream collection system.
The qualified fine powder is conveyed by airflow to a cyclone dust collector and discharged through the bottom discharge valve as the finished product. The exhaust gases, containing traces of dust, are thoroughly purified by a pulsating dust collector and then vented to the atmosphere by a blower through a silencer, resulting in clean production.
Technical Specifications
CONTENIDO | MSF600 | MSF800 | MSF1000 | MSF1250 | MSF1680 |
Rodillos (piezas) | 12 | 21 | 28 | 32 | 44 |
Diámetro de Anillo (mm) | φ600 | φ800 | φ1000 | φ1250 | Φ1680 |
Velocidad de Eje (rpm) | 250-280 | 230-240 | 180-200 | 135-155 | 120-130 |
Tamano Max.de Alimentación (mm) | 20 | 20 | 20 | 20 | 25 |
Producto Final (malla) | 325-2500 | 325-2500 | 325-2500 | 325-2000 | 325-2000 |
Capacidad (t/h) | 0.2-3 | 0.5-4.5 | 1-8.5 | 2.5-14 | 5-25 |
Dimensión (m) | 11.5*3.5*5.2 | 13*3*5.8 | 18*4.6*8.6 | 14*9*10.25 | 16*5*11 |
Molino Principal (kW) | 45 | 75 | 132 | 200 | 315 |
Clasificador (kW) | 15 | 18.5 | 30 | 75 | 132 |
Trituradora de Martillos Motor (kW) | PC300*400 PC400*600 | 11/18.5 | PC400*600 | 11/18.5 | PC600*800 | 45 | PC600*800 | 45 | PC600*800 | 45 |
Elevador Motor (kW) | TH200*8.2m TH200*6.04m | 3 | TH200*9.79m | 3 | TH300*11.05m | 4 | TH300*13.55m | 5.5 | TH300*16.31m | 7.5 |
Alimentador de Banda Motor (kW) | 300*60*1000mm | 1.1 | 300*60*800mm | 1.5 | 300*60*1800mm | 1.5 | 400*80*2000mm | 1.5 | 400*80*2800mm | 2.2 |
Colector de Polvo Por Pulsos | DMC96 | DMC120 | DMC160 | LDMC35-8 | LDMC64-9 | LDMC64-9 (2 sets) |
Transportador de Tornillo de Descarga Motor (kW) | / | LS219-4.5 | LS219-3 | 3/3 | LS245-6.2 | 4 | LS315-10.34 | 7.5 | LS315-10.34 (2 sets) | 7.5*2 |
Compresor de Aire Motor (kW) | KSH150D | 11 | KSH240D | 15 | LGY5-8 | 30 | LG6.2/8 | 37 | LG10/8 | 55 |
Offices in Latin America
Applicable Materials
MR Manufacturer
Check the price
Please fill out this form to receive technical support or pricing.
